News: Press Releases

Composite Deck Screws From PAM Fastening Now Available In Bulk Packs Of 350 and 1,750

PAM Fastening Technology, Inc. of Charlotte, N. C. now offers its composite decking screws in bulk packages of 350 or 1,750 screws for jobs where a PAM Autofeed Screw Driver System is not practical such as assembling deck railings. Besides decking, composite decking screws can also be used for railing, fencing and other applications.

The PAMDrive® Composite Decking Screws from PAM Fastening have a unique dual thread design that helps pull the deck board and joist together and a head design that eliminates “mushrooming”. The result is a clean, flush finish countersunk to the desired depth. Unlike many composite decking screws, the PAMDrive® screw does not require pre-drilling for most applications which saves time. The screw also reduces driving torque by over 23% versus comparable screws.

Available in lengths of 2.5 in. or 3.0 in., the PAMDrive® screws come in a brown, gray, tan, red Magni coating or stainless steel. The Magni coated finish is resistant to treatment chemicals used in framing lumber treated for above ground applications.

The 350 quantity bulk screw packages are available in case lots of 10 packages to a case, 160 cases to a pallet. The 1,750 quantity packages are available in case lots of 48 buckets to a pallet. Each of the 350 and 1,750 count packages include a driver bit. Discounts are available for case and pallet orders. Discounts are available for case and pallet orders.

High Temperature Hot Melt Glue Gun Now Available in an Extrusion Model

CHARLOTTE, NORTH CAROLINA — An updated version of its high temperature hot melt glue gun designed for use with EVA, polyolefin and other pressure sensitive high temperature adhesives in a variety of industries and applications is now available from PAM Fastening Technology, Inc. Updates include several changes to simplify the tool to improve its performance and ease of maintenance.

Available in an extrusion model, the HB 710 HT from PAM Fastening hot melt glue gun can be used in dot, bead and film applications. A micro-processor controlled and automatic temperature reduction system delivers optimum amounts of adhesives on heat sensitive materials. High temperature insulation and specially designed nozzles allow maintenance of desired temperature throughout operation.

A short response time between the trigger release and hot melt discharge assures quick yet safe application when required without waiting. Key to the tool’s performance is the pneumatic assistance given to adhesive application.

The gun is ideal for use in a variety of industries including packaging, automotive, electrical components, furniture and textiles.

Features of the HB 710 HT

The high temperature HB 710 HT hot melt gun from PAM Fastening has an ergonomically shaped handle to help eliminate fatigue and a single-handed bayonet
closure for comfort. 

The gun’s integrated digital temperature and control feature ensures temperature accuracy within +/- 2° F and continuously adjusts the temperature from 104°F to 482°F to meet required application requirements. A melt tank in the gun stores up to 6.8 oz of hot adhesives for fast and safe application. The gun is capable of discharging up to 7 pounds of hot melt per hour.

The pneumatically assisted extrusion tool has a 600 Watt heating element that uses 120 Volts of power and consumes 2.1 cfm of air.

The spray gun weighs 3 lb for extrusion applications. A wire stand is included as standard with a work station or tool stand optional.

About PAM Fastening

With over 26 years of experience, PAM Fastening Technology is an innovative supplier of applicators for a wide variety of bonding and sealing applications. PAM’s hot melt applicators include a full line of industrial quality glue stick guns and pneumatic bulk glue guns and adhesives. Corporate and research offices are located in Charlotte, NC.

PAM is also a leader in autofeed screw gun and framing technologies.

PAM’s tools are used in a variety of industries including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging. The company also offers a diverse line of frame assembly equipment and accessories for the framing and hobby industries.

PAM Collated Deck Screws Offer High Torque, No Waste Design To Eliminate Common Problems

PAM Fastening Technology offers a line of PAMFAST™ Magni-coated collated composite deck screws that when used with the PAM Auto Feed system eliminate many common problems and reduced the time required for installation. In addition, the resulting deck has a more consistent countersink for all the screws meaning a cleaner, more attractive deck surface every time.

The PAMFAST™ Composite Deck Screws have a special head design that eliminates “mushrooming” of the composite deck during installation and a dual thread that pulls the deck board and joist together more tightly. Unlike most other composite deck screws, the PAMFAST™ collated screw does not require pre-drilling meaning time savings that are noticeable on every job. The system reduces work hours and ensures uniformity of the countersink and when used with the extension pole means no bending over to insert the screw.

The thread design reduces driving torque by over 23% versus other comparable screws resulting in no wobble or waste and a considerably longer lasting bit.

Available in four coated colors: brown, red, tan, gray, as well as stainless steel, The PAMFAST™ composite deck screws resist corrosion and rust and color match with most decking materials. The screws are available in #10 by 2 ½ inch and #10 by 3 inch sizes.

The PAMFAST™ composite deck screw is designed for use with PAM’s P13 Autofeed Screwdriver System that uses collated screws to quickly attach deck boards. The PAMFAST™ composite screw can also be used with other Autofeed Systems including Milwaukee, Senco, Grabber, Hitti and Hitachi brands. They are also designed for use with products such as TREX®, CHOICE DECK®, WEATHERBEST®, NEXWOOD®, EPOCH® and EVERGREEN®.

These screws are part of the PAM Fastening Technology’s family of fastening systems that include a wide variety of collated screws for use in their Autofeed Screw System in multiple applications including drywall, roof tile, subfloor and wood decking (treated and exotic lumbers).

PAM Fastening Introduces The 700KD Hot Melt Cartridge Applicator For High Performance Bonding

PAM Fastening Technology introduces an improved hot melt cartridge applicator with a large 3 mm extension nozzle and increased heating in the nozzle block area of the gun for easier spraying or improved extrusion of the adhesive.

Designed for PUR and other thermoset hot melt cartridges, the new PAM 700KD Cartridge Applicator uses an internal heated chamber to hold a 10 oz (310 ml) capacity aluminum cartridge and is available in a spray or extrusion model. The integrated digital LED temperature display and controls have an adjustable operating temperature of 100°F-410°F (40°C-210°C).

With a warmup time of 10 minutes or less, the lightweight PAM 700KD is well suited for a variety of projects. The Extrusion model can be used in areas varying from large surfaces to more precise bead or line applications. The spray applicator quickly and efficiently delivers adhesives with little waste and high accuracy through precise spiral spray patterns.

An automatic temperature reduction system cools the adhesives 100°F for every 20 minutes the system is left unattended. An electronic temperature control and a safety ground terminal add to operator security.

The use of compressed air supply allows for precise control of flow while providing a fine or wide line, bead or spray, depending on your adhesive application requirements.

The one part polyurethane moisture-curing adhesive in the cartridge eliminates metering and mixing and simplifies the production process. Common bonding substrates include wood, plastic, rubber and vinyl.

Technical Specifications

The PAM 700KD weighs 3.3 lbs (1.5 kg), uses 600 Watts of power and has a 5 amp current input. Tank capacity is one 10 oz. (310ml) aluminum cartridge. Normal operating pressure is 29 psi to 87 psi (2 to 6 bar).

Unique PAMTite Hot Melt Adhesive from PAM Fastening

A unique hot melt adhesive that applies a strong, clear finish bond to a variety of materials and substrates is now available from PAM Fastening Technology, Inc.

While PAMTite is designed for use on a wide variety of products such as finished or unfinished leather, tile, mdf , cement backer board and drywall, it is finding its greatest use and acceptance in adhering carpet tack strips (wood, metal or plastic) to finished concrete. The PAMTite hot melt adhesive from PAM Fastening has a superior non-visible bond that sets in only 60 seconds and can be placed under stress after five minutes. According to PAM Fastening, its performance is similar to a more costly permanent pressure sensitive hot melt adhesive or construction adhesives that may take 2-24 hours before they can accept the stress of carpet stretching.

The aesthetic and eye-appealing adhesive bond is also well suited for use on plastics, EPDM rubber, metals, foils and other unique substrates. With a bond that will last the glue is ideal for use on upholstery projects and furniture repair.

Available in 1/2-inch glue sticks in 22 lb cartons, the adhesive has a softening point of 194°F and the working temperature is from 356°F to 392°F. For best results, PAM Fastening recommends applying the bond using the company’s HB 220 applicator. The HB 220 is simple to use within an adjustable temperature range of 284 °F to 428 °F and has the capability to dispense the PAMTite at the proper working temperatures.

“Since the bond is clear, non-visible and superior in strength, the adhesive can be applied to numerous consumer products in the furniture and upholstery business as well as a variety of other area,” explained Ed Minchew, President of PAM Fastening. “Once bonded, the bond is extremely strong.”

HB 220 and PAMTite Carpet Tack Strip Installation Flyer 

HB 220 and PAMTite Carpet Tack Strip Installation Flyer - Spanish