Visit us:

2120 Gateway Blvd.
Charlotte, NC 28208
P: 800.699.2674
E: sales@pamfast.com

Vega S

The VEGA S is an electro-pneumatic saw that is capable of cutting moulding at multi-angles. There are two blades and motor assemblies that operate independently and automatically move to 22.5°, 30° and 45°. The blades operate separately and cut by arcing up from the back of the machine. The VEGA S is an ideal machine for mirror and photo frames The cutting capacity depends on the angle of the blades:
45°-- 4” wide by 2 9/16” high
30°-- 4 1/8” wide by 2 9/16” high
22.5°-- 4 1/8” wide by 2 9/16” high
Standard Equipment:
Two 380mm blades
Three moulding support arms (39 3/8” long)
40” measuring scale
Right sliding stop
Vertical pneumatic clamps
Waste support block with automatic air actuated removal device.
Independent saw blade angle movement
Clamping timing device
Ideal for frame shops producing 500+ frames per day. Cuts moulding up to 4” wide by 2 9/16” high.

Optional Equipment: (Pricing Available Upon Request)
Kit to operate saw with a pneumatic foot pedal
Moulding support arms 39 3/8”
Cutting angle option of 15° instead of 30°
Sliding measuring stops
Special right side clamp to hold moulding while cutting very short pieces (2” long)
Aluminum extension guide
Moulding support arm with additional measuring scale and aluminum extension guide
Sliding measuring multi-stop system
Internal light