Visit us:

2120 Gateway Blvd.
Charlotte, NC 28208
P: 800.699.2674
E: sales@pamfast.com

Brevetti C100

The Brevetti C 100 is the latest generation of the AUT 82. This machine is a coil feed system that can be purchased in two models. One model uses NR, VR, VM corrugated shaped fasteners and the other model uses VC, V-shaped fasteners. It is a manual machine that is simple to use and very durable. Companies running sustained production that don’t require computerized technology are best suited for the C 100. Fasteners on coils allow operators to run continuous production without constantly having to load fasteners in the machine. The mitered pieces of moulding to be joined are connected tightly by a steel staple. These staples are in coils and are available in 4, 5, 6, 8, 10, 12, 14 and 16mm according to the height of moulding. The machine is equipped with a sliding 90? fence for manual placement of fasteners in two pre-set positions. The operator can place additional fasteners in between the pre-set positions. The C 100 requires the operator to move the moulding under the nailing head for nail insertion. The C 100 feeds, cuts, and drives the nail. Ideal for frame shops producing 500+ frames a week. Joins moulding from ¼” to 4 ¾” wide by 5/16” to 3” high.

Optional Equipment: (Pricing Available Upon Request)
Cold glue dispenser
Extension/ side arm tables
VC nailing head for converting the machine to a V-shaped fastener.
VM-VR-NR nailing head for the maximum in fastening versatility.